Fix Custom Binary Blocked By FRP On SM-G935L U2 Korean Variant With UART Cable

Fix Custom Binary Blocked By FRP On SM-G935L U2 Korean Variant With UART Cable

Fix Custom Binary Blocked By FRP On SM-G935L U2 Korean Variant With UART Cable

Learn how to Fix Custom Binary Blocked By FRP On SM-G935L U2 Korean Variant With UART Cable just in a matter 1minute. This method will preserve User Data; it won’t delete your contacts, messages, media files, all important contents on your device will be intact.

To begin, we need the following:

  • UART CABLE
  • Z3X SAMSUNG TOOL PRO
  • EFT DONGLE
  • OCTOPUS BOX
  • Just any tool that supports the use of UART functions


If you have all of these aforementioned tools, head over to the solution as follows:

  • Download SM-G935L U2 ENG SBOOT from our support site below link

SM-G935L U2 ENG SBOOT

  • Download SM-G935L STOCK SBOOT from same support site
  • Open Odin3.exe, choose AP, select eng sboot you downloaded above
  • Boot device to download mode and connect to PC
  • Press Start, within seconds, eng sboot will be flashed to device and you’ll be on factory boot loader mode.[Note: device may be on bootloop, don’t panic, it’s normal!!!]
  • Now Open Z3x Sasung Toolpro, Select model, as SM-G935L, go to unlock, select Z3x serial port
  • Go down and click on FRP UFS. Please refer to Screenshot below
  • Fix Custom Binary Blocked By FRP On SM-G935L U2 Korean Variant
    Fix Custom binary blocked by frp
  • Connect UART CABLE to Z3X Box Port
  • Then carefully, Hold Volume Down + Power key while connecting UART CABLE to Samsung device
  • Follow the prompted instructions, when asked to release volume down key, do so, while keep holding Power key until FRP is successfully reset

    Fix Custom binary blocked by frp Done Via UFS

      • Fix Custom binary blocked by frp Done Via UFS. See logs: Hold ‘Vol down’ and press ‘POWER ON’ for 2-3 seconds
      • Checking phone at COM32 OK
      • Phone detected, do not release ‘Vol down’
      • Reading data from phone… OK
      • Release ‘Vol down’ now
      • Comparing selected model… match (G935L)
      • Setup connection… OK
      • Reseting FRP… OK
      • Rebooting phone… OK
      • Reset FRP done
      Done with Samsung Tool PRO v.35.2

  • Quickly Hold Volume Down + HOME+POWER, at the prompt, press VOLUME UP to get to DOWNLOAD MODE
  • Open ODIN3 Application , choose AP or BL, select SM-G935L STOCK SBOOT you downloaded above
  • Press Start, within seconds, you’re device will be flashed, and you’re boot loader will be returned to stock
  • Wait for few minutes, for device to boot to home screen. Now at this point if the customer has Lock screen, kindly ask him to input his/her password.{If there is no LOCK SCREEN, proceed to the next important step}

  • Go to settings, About, Software Info, and Tap BUILD NUMBER 7 times
  • Go back to Main Settings Menu, scroll down to Developer Options, and enable OEM UNLOCK
  • Restart device and you’re good to go.

Angle360 Support

Angle360 provides Tech Tips, Remote Repair Assistance for G.S.M Gadgets & Computer Software related problems, Tech educational tips, How-to, e.t.c. If you want to know who owns this site and how activities on here are carried, then do so at your own convenience. To explain briefly; "we're Three-In-One" family.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: