Huawei B310s-927 Power Light Only Fix [New Method]
Huawei B310s-927 Power Light Only Fix
One of the reasons this site was created is to make things easy for you, on today’s guide, you’ll learn how to fix Huawei B310s-927 Power Light Only. This guide is going to be extended from fixing Huawei Router B310s-927 Power light only, to using same files in unlocking Huawei B310s-927 and all B310 CPE models.
Table Of Contents
- Huawei B310s-927 Power Light Only Fix
- Unlock Huawei B310s-927 In 5 Minutes
- Install Missing Huawei Router & Modem Drivers
- Follow Youtube Video Tutorial, Check Link Beneath
- Ask Questions & Join Discussion At the Forum
Prerequisite
- Download all Huawei Router & Modem Drivers Latest
- Download Files For Repair & Unlock From Angle360_Main
- Original Cut-Out Usb Cable & Computer
- Dismantle Huawei Router
- Internet Connection(Optional, only needed to download files)
- Peaker(For Test point tissing)
Download All B310 Repair Files Here
Instruction
- Dismantle Huawei B310s-927, B310 CPE router.
- Solder the usb cable to the Router Usb test point for connection with Computer as shown below
- Pluck the other end of the soldered usb cable into your computer port, attach a jumper
wire or scissors at the first two of the four points in-between the triangular image and the WPS button, while immediately plucking your router into a power source and open device manager to confirm connection. If done correctly, you should see “Huawei Mobile Connect-3g pc ui interface” in device manager.
- Once you’ve made sure the above procedures are carefully carried out, follow the next procedures
- Download all Huawei B310s_ Loader(Deadboot fix) & firmware, Premium Loader.
- Double click on the B310s_Loader.exe, immediately, repair will be started, and once it loads up to 100%, router will power up light on.
- Next, Double click on Firmware package, “B310s-22_Update_21.321.03.00.00.exe”
- A pop up installation window will appear, click Start, give it some time; in few minutes, installation will be completed and router display all the indicators with either 2 bars or 1 bar of network signals and will go back to Powerlight Light On.
- Disconnect from charging.
- Wait few seconds, insert sim card and re-connect to charging source in hopes of a complete resurrection.
- Welldone!!!
Important Update To This Article, Please Read Carefully & Do Likewise(Second Solution For Those Who Could Not Fix Router With Above Instruction)
Assuming you still encountered Power Light only, Even After performing the above instructions, we’ve got you covered below,… Read On & Follow Instructions.
- Download Balong Tool
- unzip and execute Balong Tool you downloaded from above. In the balong Tool interface, click on detect, to enable drivers, if done correctly, it should appear in the following screenshot order:
Click on the three dots, and go to where you saved your b310s-927 usbloader you downloaded from above and click open.
See attached picture in the example below:
- Click load, wait for few seconds for the Balong Tool to repair the corrupted partition in your router.
You should see blue lines running to the end of the balong tool, and your router should restart immediately. - Disconnect from power source and reconnect again, you should see four lights; Powerlight, Network mode indicator, Wifi/wps indicator and Lan/wan indicator
At this stage, in most cases, the network indicator turns red; indicating the absence of sim/service, try to insert sim and set APN of your provider and restart your router, if network signals show, your router Repair Journey ends, hence Congratulations!
We Just added the above ALTERNATIVE INSTRUCTIONS as a result of the new discovery we had during B310S-927 Power Light only fix, after using our premium files for repair, we discovered that the Router was still stuck in Power light, and it was indeed a shocker to us, so we flashed the provided usb safe loader with Balong Tool and finally, got full signals. Though this is not always the case, it rarely happens, so our previous solution is still rated 100%.
Conclusion, please read below to learn how to update missing huawei Router & Modem drivers, in case your drivers shows triangle in Device Manager.
|Watch Youtube Video| Complete Video Guide
Angle360 provides Tech Tips, Remote Repair Assistance for G.S.M Gadgets & Computer Software related problems, Tech educational tips, How-to, e.t.c. If you want to know who owns this site and how activities on here are carried, then do so at your own convenience. To explain briefly; “we’re Three-In-One” family.
Thank you very much and respect
The way you followed is 100 percent effective
Further progress and prosperity
Thanks
We’re glad our article is of help to you. Greetings and Goodluck to You SudanDevTeam.
Please send the Huawei B310s-927 repair firmware not b310s-22 firmware.
All repair files for B310S-927 are on this page, take the time to read through.Thanks.
For password: angle360.tech
thank you so much ur trick and file is 100% right and some other are fake.
one more plx advive how do repair imei.
I am happy this solution confirms itself for you! On repair imei aspect, we will find time to publish instructions before the week runs out and include it on this page. Make sure you bookmark this page and click on the bell to subscribe, to stay in touch.
Thanks brro … its work on b310s-22 with latest firmware
My device was repaired on dead boot with your files
many thanks
Glad to know it works out for you. Please help us recommend Angle360 to friends.
Where is downlode line
Thanks, the password of copressed files please 🙂
Hello; I need the password of the compressed files please 🙂
password is on youtube video. check there pls
Ok thanks 🙂
what password please ?
no password on youtube video
Please send the Huawei B310s-927 repair firmware not B310s-927 firmware.
So I couldn’t recover my b310s-927 router.
what is the password of firmware help pls.
password: angle360.tech
sir in update wizard what is password i try angle360.tech but wrong password said.thanks for reply.
I have re-downloaded and tested password to be working
i have redownload again too sir.in rar file the password is ok ,angle360.tech..but when i ready to click the start the update wizard in no.3 they pop up password.i try angle360.tech but wrong.
Hello Bert, i understand exactly the situation you are into.
Before you use this firmware, first of all, flash the Loader.exe
Look carefully where you downloaded the firmware, you will find Loader.exe, download and flash that loader before flashing the firmware, it won’t ask you for password. Let me know if this works out for you.
thanks sir ,my modem is probably broken
Hello sir, excelente method, it worked on b310s518
we have one only thing to fix, after flashing, ssid and wifi password changed
is any way to restore them by at command? we cange by the config menu, but if we make a hard reset, it is erased again
wifi after flashing is HUAWEI-3400000 and no password.
thanks
You can rename it to previous ssid, after recovering router, the default password becomes “12345678”
Please can you send the huawei B310s-927 frimware repair.exe
Please can you send the huawei B310s-927 firmware repair.exe
What happens to the one provided on this page?
I have another issue with mine. The signal light on my device goes off (B310s-927). Will this pattern work on it as well?
Yes, just follow the guide carefully.