Root SM-N975F U3 With EFT Dongle Pro

Root SM-N975F U3 With EFT Dongle Pro

As promised on my Social Media Handle, i will be explaining in details, how to Root SM-N975F U3 With EFT Dongle Pro and other difficult SAMSUNG models. This guide is going to be ranging from creating patched boot.oEFT file compatible for flashing with EFT Pro Dongle, to renaming the .oEFT file to make it compatible with EFTSU Flash Tool.

Important Links To Follow:

 

Before You Root, Perform These Important Necessary Steps:

i.). Learn How To Unlock Your Device Bootloader (Mandatory First Step you must take)

ii). Enable OEM Unlock option in Developer’s Option.

iii). If OEM UNLOCK is missing, connect N975F to computer, open Chimera Tool, Click On Unlock Tap, then Click On RMM UNLOCK .

Root SM-N975F U3 With EFT Dongle Pro

If the above process fails, due to unsupported model In Chimera Tool:

  • Just enable wifi connection on device.
  • Disable auto-update Date & Time.
  • Disable automatically update firmware via Wi-Fi connection.
  • Check for update, you will be told, you are on the latest update.
  • Restart device and check Developer’s Option again, OEM Unlock will be enabled! If you just followed this guide, you are now ready to continue rooting with below provided guidelines:-

Follow These Guidelines,to Root SM-N975F U3 With EFT Dongle Pro:

  • Download Stock firmware for your device model from Sammobile.com
  • Extract the stock firmware, you will find five Odin Compatible individual images.

 

  • To avoid errors like, Finger Print not working, Camera Connection failure, etc, always flash phone with the firmware you downloaded before creating root, this helps to keep your device clean, and avoids errors that may later occur as result of combining different boot.img files.

 

  • Open Eft Pro Software.
  • Then, click on GENERAL >>Boot|Recovery >>Make Rooted Boot appears beneath. Refer to Screenshot below:
Root SM-N975F U3 With EFT Dongle Pro
Root SM-N975F U3 With EFT Dongle Pro
  • You’ll be asked to select AP package in .tar.md5, do so and allow in few minutes, for Software to create your root packaged: “This process bypasses the vbmeta error and sets the patched boot.oEFT suitable for flashing with EFTPro tool.”

 

  • Within a few minutes, your root file will be created, and saved in the same extracted firmware folder, go there and look it up! You may choose to tick the option, “Direct Flash To Download Mode After Make

 

  • Next, Go to SAMSUNG >>Flash>> from the drop down, select >>Flash Patched EFT Files(Download Mode). 

Root SM-N975F U3 With EFT Dongle Pro

  • You’ve done the above, click Start, then you will be asked to select the created root file, select and confirm flash. Within few seconds, your device will be flashed.

 

  • Wait a few minutes, your device will be rebooted into Recovery with the option to Factory Reset. Perform Factory Reset and reboot System.

 

  • At this point, your device will take quite a bit time to boot up, wait please!
  • Once your device gets booted up, set it up, and DO NOT RESTART YOUR DEVICE FOR ANY REASON YET!!

 As soon as you are able to access the Home Screen of your device, repeat these guidelines below once again:

  • Just enable wifi connection on device.
  • Disable auto-update Date & Time.
  • Disable automatically update firmware via Wi-Fi connection.
  • Check for update, you will be told, you are on the latest update.
  • Restart device and check Developer’s Option again, OEM Unlock will be enabled! If you just followed this guide, you are now ready to continue rooting with below provided guidelines

 

If after you’ve performed the above steps, you discover that your N975F still not rooted, power off your device, boot to Recovery Mode, from there, reboot System.

  • Alternatively, you can as well enable usb debugging mode and connect your N975F device to Computer.

 

  • Open EFTSU Flash Tool, then click on Reboot ADB Device to Root Mode, your device will reboot either to Recovery Mode, or will reboot to home screen. Either ways, you will be rooted.

Root SM-N975F U3 With EFT Dongle Pro

 

  • Download and install EFTSU Manager.APK file from Google PlayStore to manage root permission.

We have also written a guide on how to:

Create Compatible EFTSU Flash Tool File from .oEFT file extension

Conclusion:

We have taken quite enough time to generate this guide, we hope that following this instruction on how to Root SM-N975F U3 With EFT Dongle Pro, will help you gain an idea of rooting other model of latest SAMSUNG devices, however, we are deeply rooted in re-writing instructions for other model.

Angle360 Support

Angle360 provides Tech Tips, Remote Repair Assistance for G.S.M Gadgets & Computer Software related problems, Tech educational tips, How-to, e.t.c. If you want to know who owns this site and how activities on here are carried, then do so at your own convenience. To explain briefly; "we're Three-In-One" family.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: